+48 14 621 00 29
biuro@elbit.edu.pl
Koszyce Małe, ul. Źródlana 8
33-111 Koszyce Wielkie
Device data sheet in PDF format
The CZU2HT temperature and humidity sensor (thermo-hygrometer) is designed to measure the temperature and relative humidity of air in enclosed spaces, and, with appropriate protection of the measuring sensor, also outside buildings.
After reading the measurement data (temperature and relative humidity) and taking into account the appropriate corrections, the sensor calculates the dew point.
The sensors are factory-calibrated to measure within a specific range and do not require adjustment. The sensor is designed to be powered from an external DC source with a voltage between 10V and 30V. The sensors have built-in protection against reverse polarity of the power supply and a built-in set of surge protection elements protecting the sensor from surges on the RS485/RS422 bus. The measured values, i.e. temperature, humidity or dew point, are also available on programmable analogue outputs 4-20mA or 0-10V.
Temperature and humidity sensor, dew point sensor - CZU2HT
Technical data:
| Temperature measurement accuracy: | 0.3°C |
| Humidity measurement accuracy: | 2.0% |
| Power supply: | 10 to 30VDC |
| Current consumption: | 60mA |
| Interface: | RS232 or RS485 |
| Protocol: | MODBUS RTU |
| Device address: | set from 1 to 255 |
| Transmission speed: | 2400, 4800, 9600, 19200, 28800, 57600 kbit/s |
| Maximum range: | 1200m |
| Degree of protection of the housing: | IP65 |
| Operating temperature of the electronic system: | -40 to 80°C |
COMPANY:
Elbit Firma Innowacyjno – Wdrożeniowa
Koszyce Małe, ul. Źródlana 8
33-111 Koszyce Wielkie
NIP: 873-104-51-74
tel.: +48 14 621 00 29
e-mail: biuro@elbit.edu.pl